Tripp Lite B126-2A0 Owner's Manual download pdf (Page 7)

OPTIONAL LOCAL

MONITOR

B126-2A1 LOCAL

TRANSMITTER

B126-2A1 REMOTE

RECEIVER

B126-110 REMOTE

REPEATER

B126-110 REMOTE

REPEATER

B126-110 REMOTE

REPEATER

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

BLU-RAY

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

MONITOR 1 MONITOR 2

1 x 2 Extender Kit with

Remote/Repeater Installation

Notes:

1. Test to make sure that the entire installation works properly before

running cables through ceilings/walls.

2. The diagram below shows the maximum extension distance when using

either Cat5e or Cat6 cabling. 24 AWG, solid wire Cat5e/6 cable, such

as Tripp Lite’s N202-Series, is required to achieve maximum distance

and resolution.

3. The B126-2A1 is set to transmit a stereo audio signal by default.

Press the Audio button on the transmitter unit to switch to 7.1-channel

surround sound audio. (7.1-channel surround sound signal will be

Multi-Channel or PCM)

MakesurealldevicesbeingconnectedarepoweredOFF.

ConnecttheHDMIsourcetotheINPUT port on the transmitter unit

usingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

Optional: Connect a monitor to the LOCAL port on the transmitter

unitusingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

13-08-043 93-32D0.indd 7 8/28/2013 2:17:39 PM

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Tripp Lite B126-2A0 Owner's Manual Page 7