Tripp Lite U223-004-IND User Manual download pdf (Page 5)

Mounting Kit Installation

This hub can be placed on a at surface, mounted on a wall or attached

to a standard DIN-Rail. To mount the hub to a DIN-Rail, please follow

the steps below.

Note: The description below is an example due to the various DIN

mounting modules and conditions.

Figure A

Step 1: Fasten the included DIN

rail hardware to the side of the

unit using the screws provided in

the packaging (See Figure A).

Step 2: Afx the hub to your DIN rail

To wallmount the hub, fasten the included mounting brackets to the bottom

of the unit, with the wallmount holes sticking out. You can then wallmount

the hub accordingly.

Notice

• Prior to connecting the hub, it is recommended that you rst install

your USB device drivers. This will ensure your device will be recognized

upon connecting it to the hub.

• The transmission rate is up to 480Mbps when connecting the hub to

a USB 2.0 port.

201205147 93-3218.indd 5 5/31/2012 9:48:35 AM

1 2 3 4 5 6 7 8

No comments

Tripp Lite U223-004-IND User Manual Page 5