Tripp Lite UPS SNMPWEBCARD User Manual download pdf (Page 9)

Chapter 4 Browser Interface

You may monitor and control a UPS system with an SNMPWEBCARD using an Internet browser. The card generates navigable

HTML pages. These HTML pages are updated to match UPS status every 30 seconds; the browser will refresh the displayed

information automatically. To update the information on a page sooner, reload the page.

Establishing a Connection

To connect to the SNMPWEBCARD:

1. Start your browser.

2. In the Address

field, enter http://IP_Address (where IP_Address is the IP Address of the SNMPWEBCARD, e.g.

http://192.168.1.1

3. The Log On Page will appear.

To Log On to the UPS Adapter

To log on and continue to the SNMPWEBCARD’s other Web pages:

1. If you have not configured the SNMPWEBCARD to require a user name or password for access, hit the Submit Logon

button to continue.

2. If the card is configured to require a user name and/or password for access, enter them here before hitting the Submit

Logon button to continue.

(Note: Default user names are guest

with no password and admin with no password.)

Navigating the SNMPWEBCARD Web Pages

The logon default screen is the Status Screen. (See Figure 4-1.) This screen is divided in to four sections:

1) Menu Bar

2) Device Information

3) Device Summary

4) Alarm Status

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

No comments

Tripp Lite UPS SNMPWEBCARD User Manual Page 9