Tripp Lite OMNISMART1050 Datasheet download pdf (Page 3)

Quick Installation

Connect your UPS to

an electrical outlet.

Your UPS will run a self-test after it is

plugged in. See Basic Operation to understand

the results of its self-test.

Plug your computer, monitor

and other equipment into

the UPS system.

Your UPS is designed to support only comput-

er equipment. You will overload your UPS if

you connect high power draw equipment such

as household appliances or laser printers to

outlets providing UPS battery backup. Select

models feature special outlets (clearly labeled

on the rear panel) which provide surge-only

(not battery backup) protection designed for

laser printers and other heavy-draw devices.

Select UPS Operating Mode.*

Press the ON/OFF button to toggle your UPS

between the UPS (“ ” LED lit) and the

CHARGE ONLY (“ ” LED flashing)

modes. Choose the operating mode based on

your location:

USA, Canada & Western Europe:

• Leave the UPS in the UPS mode at all times.

All other countries:

• Put the UPS in the CHARGE ONLY

mode when you ar

e not using connected

equipment.

(WARNING! When set to “CHARGE ONLY,” the UPS

will not provide battery backup during a blackout

or brownout)

• Put the UPS in the UPS mode when you

e using connected equipment.

*See Basic Operation section for a complete explanation

of each mode.

NORM DELAY

200306109 OmniSmart and SmartPro USB Owner’s Manual.qxd 7/14/2003 4:56 PM Page 3

1 2 3 4 5 6 7 8 ... 23 24

No comments

Tripp Lite OMNISMART1050 Datasheet Page 3