Tripp Lite OMNISMT700M User Manual download pdf

Quick Start Guide

OMNISMT700M

Not suitable for mobile applications.

This document explains the most important features of your UPS system. For additional information,

download the Owner’s Manual PDF (in English or Spanish) from www.tripplite.com/support/manuals

Warranty

Registration:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

Quick Installation

Plug the UPS into a properly grounded outlet: Please Note! The UPS will not turn ON automatically in the presence of live utility power.

To Turn the UPS ON: Press and hold the “ON/OFF/MUTE/TEST” button until you hear the system beep and then release the button. The system is now

turned ON.

To Mute the UPS: Quickly press the “ON/OFF/MUTE/TEST” button until you hear a short chirp and then release the button. The system is now muted.

To Run a Self-Test: Press and hold the “ON/OFF/MUTE/TEST” button until you hear a long, sustained beep and then release the button. The system will now

perform a self-test.

To Turn the UPS OFF: Press and hold the “ON/OFF/MUTE/TEST” button. You will hear a short chirp, followed by a beep, then release the button. The system

is now turned OFF.

Plug your equipment into the UPS: Select outlets (see diagram) will provide battery backup and surge protection; plug your computer, monitor and other

critical devices here.* Select outlets (see diagram) will provide surge protection only; plug your printer and other non-essential devices here.

Note: UPS system will function properly upon initial startup; however, maximum runtime for the unit’s battery will only be accessible after it has been charged for

24 hours.

* Your UPS is designed to support electronic equipment only. You will overload the UPS if the total VA ratings for all the equipment you connect to the Battery Backup Protected/Surge Protected outlets

exceeds the UPS’s Output Capacity. To ﬁnd your equipment’s VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 120 to determine VA. (Example: 1 amp ×

120 = 120 VA). If you are unsure if you have overloaded the Battery Backup Protected/Surge Protected outlets, run a self-test.

Basic Operation

Important Safety Instructions

201006152 • 933033-EN

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

ON/OFF/MUTE/

TEST Button

LINE POWER

LED

OVERLOAD LED Battery Backup/

Surge Protected

Outlets

USB PortSurge-Only

Protected

Outlets

Tel/DSL Jacks

with Built-In

Splitter

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed

during the installation, operation and storage of all Tripp Lite UPS

Systems. Failure to heed these warnings may affect your warranty.

UPS Location Warnings

• Install your UPS indoors, away from excess moisture or heat,

conductive contaminants, dust or direct sunlight.

• For best performance, keep the indoor temperature between 32º F and

104º F (0º C and 40º C).

• Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

• Connect your UPS directly to a properly grounded AC power outlet. Do

not plug the UPS into itself; this will damage the UPS.

• Do not modify the UPS’s plug, and do not use an adapter that would

eliminate the UPS’s ground connection.

• Do not use extension cords to connect the UPS to an AC outlet.

• If the UPS receives power from a motor-powered AC generator, the

generator must provide clean, ﬁltered, computer-grade output.

Equipment Connection Warnings

• Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment in the presence of a

ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

• Do not connect surge suppressors or extension cords to the output

of your UPS. This might damage the UPS and may affect the surge

suppressor and UPS warranties.

Battery Warnings

• Your UPS does not require routine maintenance. Do not open your UPS

for any reason. There are no user-serviceable parts inside.

• Batteries can present a risk of electrical shock and burn from high

short-circuit current. Observe proper precautions. Do not dispose of

the batteries in a ﬁre. Do not open the UPS or batteries. Do not short

or bridge the battery terminals with any object. Unplug and turn

off the UPS before performing battery replacement. Use tools with

insulated handles. There are no user-serviceable parts inside the UPS.

Battery replacement should be performed only by authorized service

personnel using the same number and type of batteries (Sealed

Lead-Acid). The batteries are recyclable. Refer to your local codes for

disposal requirements or visit www.tripplite.com/UPSbatteryrecycling

for recycling information. Tripp Lite offers a complete line of UPS

System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the

Web at www.tripplite.com/support/battery/index.cfm to locate the

speciﬁc replacement battery for your UPS.

• Do not attempt to add external batteries to the UPS.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved

by Tripp Lite could void the user’s authority to operate this equipment.

FCC Part 68 Notice (United States Only)

If your Modem/Fax Protection causes harm to the telephone network,

the telephone company may temporarily discontinue your service. If

possible, they will notify you in advance. If advance notice isn’t practical,

you will be notiﬁed as soon as possible. You will be advised of your

right to ﬁle a complaint with the FCC. Your telephone company may

make changes in its facilities, equipment, operations or procedures that

could affect the proper operation of your equipment. If it does, you

will be given advance notice to give you an opportunity to maintain

uninterrupted service. If you experience trouble with this equipment’s

Modem/Fax Protection, please visit www.tripplite.com/support for

repair/warranty information. The telephone company may ask you to

disconnect this equipment from the network until the problem has been

corrected or you are sure the equipment is not malfunctioning. There

are no repairs that can be made by the customer to the Modem/Fax

Protection. This equipment may not be used on coin service provided

by the telephone company. Connection to party lines is subject to state

tariffs. (Contact your state public utility commission or corporation

commission for information.)

Tripp Lite follows a policy of continuous improvement. Product

speciﬁcations are subject to change without notice.

BATTERY POWER

LED

REPLACE

BATTERY LED

1 2

Summary of Contents

Page 1 - Quick Start Guide

Quick Start GuideOMNISMT700MNot suitable for mobile applications.This document explains the most important features of your UPS system. For additiona

Page 2 - Guía de inicio rápido

Guía de inicio rápidoOMNISMT700MNo conveniente para los usos móviles.Este documento explica las funciones más importantes de su sistema de UPS. Para i