Tripp-lite B064-016 User Manual download pdf (Page 11)

Operation

Computer Keyboard/Mouse Reset

Intheeventthatthekeyboardandmousearenotoperatingcorrectly,aresetmaybeneeded.ToperformaUSBkeyboard/

mouseresetonthecurrentlyselectedcomputer,dothefollowing:

1. Activate Hotkey Setting Mode using the aforementioned command.

2. Press and release the [F5] key.

After pressing the [F5]key,youwillautomaticallyexitHotkey Setting Mode and a keyboard/mouse reset will be performed. If

youarestillunabletoregainaccesstoyourkeyboardandmouse,youmayneedtorestarttheaffectedcomputerorperforma

system reset.

Turning Beeper ON/OFF

ThebeepersoundthatoccurswhenperformingahotkeycommandorwhenswitchingportscanbetoggledON/OFFviathe

OSD(seetheActivateBeepersettingintheF3:SETmenusectiononpage15);or,byperformingthecommandbelow.

1. Activate Hotkey Setting Mode using the aforementioned command.

2. Press and release the [B] key.

After pressing the [B] key,textwillbedisplayedstatingthebeeperhasbeenturnedONorOFF,andHotkey Setting Mode will

beexited.

Setting the Port Operating System (Administrator Only)

Theport’soperatingsystemsettingcanbechangedtomatchthatoftheconnectedcomputerviatheOSD(seetheSet

OperatingSystemsettingintheF4:ADMmenusectiononpage16);or,byperformingthecommandbelow.

1. Activate Hotkey Setting Mode using the aforementioned command.

2. Press and release the [F1], [F2] or [F3] key. [F1]setstheoperatingsystemtoWindows,[F2] toMacand[F3] to Sun.

Afterpressingthedesiredfunctionkey,theportoperatingsystemischangedandHotkey Setting Mode exited.

Restore the OSD Default Values (Administrator Only)

RestoringtheOSDdefaultvalueswillerasechangesandrestorethedefaultvaluesforallOSDsettingsexceptusernames,

passwordsandportnames.TheOSDdefaultvaluescanberestoredviatheOSD(seetheRestoreDefaultValuessettinginthe

F4:ADMmenusectiononpage16);or,byperformingthecommandbelow.

1. Activate Hotkey Setting Mode using the aforementioned command.

2. Press and release the [R] key.

3. Press the [Enter] key.

After pressing the [Enter]key,textwillbedisplayedstatingthedefaultsettingshavebeenrestored,andHotkey Setting Mode

willbeexited.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Tripp-lite B064-016 User Manual Page 11