Tripp Lite PDUMNH32HV Owner's Manual download pdf (Page 6)

3.1-1

3.1-2

PDUMNH20HV

PDUMNH30HV & PDUMNH32HV

PDUMNH20HV

PDUMNH30HV & PDUMNH32HV

3. Installation

3.1 Mounting the PDU

The PDU supports ve primary mounting congurations: 2U Rack, 1U Rack, 0U Rack,

Wall and Under-Counter.

Note: Regardless of conﬁguration, the user must determine the ﬁtness of hardware

and procedures before mounting. The PDU and included hardware are designed for

common rack and rack enclosure types and may not be appropriate for all applications.

Exact mounting conﬁgurations may vary.

3.1-1

2U Rack Mounting: Attach the

included brackets to the sides of

the PDU with the included screws.

After installing the brackets,

position the PDU in the rack and

install four user-supplied screws

through the unit’s brackets and

into the rack rails as shown.

3.1-2

1U Rack Mounting: Use three

screws to attach each of the two

longer mounting brackets to the

PDU as shown. You can mount

the PDU in a recessed position by

attaching the mounting brackets so

they extend beyond the front panel

of the PDU. (If you plan to use the

cord retension shelf, attach the

mounting brackets in a recessed

position.) Mount the PDU in the

rack by inserting four user-supplied

screws through the mounting

brackets and into the mounting

rack rails.

201110150-93-3050.indb 6 11/9/2011 11:13:08 AM

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

No comments

Tripp Lite PDUMNH32HV Owner's Manual Page 6