Tripp-lite B064-016 User Manual download pdf (Page 9)

Operation

OSD Port Selection

WhenintheOSDmainscreen,youcanaccessacomputer/serverbyhighlightingitintheportlistandpressingthe[Enter]

key;or,bydouble-clickingonitwiththemouse.Youcanhighlightaportusingthe[i] and [h]arrowkeysonthekeyboard;or,

by clicking on the triangle icons on the far right of the OSD main screen. The [Page Up] and [Page Down] keys will display

additionalportsintheinstallation,aswillclickingonthearrowiconsonthefarrightoftheOSDmainscreen.Daisy-chain

stationsmayappearintheOSDascollapsedfolders,inwhichcaseyouwillneedtohighlightthedesiredstationandpressthe

[Enter]keytotogglebetweenexpandingandcollapsingthestationports.Youcanalsousethe[g] and [f] keystoexpand/

collapsethestationports;or,clickonthedesiredstationwithyourmouse.

Hotkey Commands

HotkeycommandsallowyoutoswitchthefocusoftheKVMusingonlythekeyboard.Thefollowingsectiondescribesthe

hotkeyfunctionalityavailablefortheB064-016.Attheendofthissectionisatableofalltheavailablehotkeys.

Hotkey Setting Mode

All hotkey commands start by entering Hotkey Setting Mode.WheninHotkey Setting Mode,the[Scroll Lock] and [Caps

Lock] keyboard LEDs ﬂash in succession and ordinary keyboard and mouse functions are suspended. Only hotkey related

keystrokescanbeperformed.Toexitwithoutperformingahotkeycommand,simplypressthe[Esc] key. Note: Hotkey

command mode must be turned on in the OSD for hotkeys to work. (See the Hotkey Command Mode setting in the F3:SET

menu section on page 15.)

ToinitiateHotkeySettingMode,performthefollowingcommand:

1. Press and hold down the [Num Lock] key.

2. Whileholdingdownthe [Num Lock]key,pressandreleasetheminus [-] key.

3. After releasing the minus [-] key,releasethe[Num Lock] key.

Alternate Hotkey Setting Mode Activation Command

BydefaultthecommandtoactivateHotkey Setting Mode includes the [Num Lock] and minus [-] keys. This can be switched

to include the [Ctrl] and [F12]keysbyperformingthefollowingcommand:

1. ActivateHotkeySettingModeusingtheaforementionedcommand.

2. Press and release the [H] key.

A couple of seconds after releasing the [H]key,theactivationcommandwillbechangedtouse[Ctrl] instead of [Num Lock],

and [F12] instead of the minus [-]key.Oncetheactivationcommandischanged,youwillbeexitedfromHotkey Setting

Mode.Tochangetheactivationcommandback,simplyperformtheAlternate Hotkey Setting Mode Activation Command again.

The Hotkey Setting ModeactivationcommandcanalsobechangedviatheOSD.(SeetheHotkeysettingintheF3:SETmenu

sectiononpage15.)

Alternate OSD Menu Activation Command

YoucanalsoswitchthecommandthatisusedtoopentheKVMOSD.ThedefaultsequencetoopentheOSDmenuis[Scroll

Lock] [Scroll Lock]. This command can be changed to [Ctrl] [Ctrl] or [Alt] [Alt]viatheOSD(seetheOSDHotkeysetting

intheF3:SETmenusectiononpage14);or,byperformingthefollowingcommand:

1. Activate Hotkey Setting Mode using the aforementioned command.

2. Press and release the [T] key.

After pressing the [T] key,theOSDmenuactivationcommandtogglestothenextavailablecommand.Commandswillalways

toggle from [Scroll Lock] [Scroll Lock] to [Ctrl] [Ctrl] to [Alt] [Alt]. Perform this command until you have selected the

desired OSD activation command. Note: When using [Ctrl] [Ctrl] or [Alt] [Alt], you must hit the same [Ctrl] or [Alt] key both

times.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Tripp-lite B064-016 User Manual Page 9