Tripp-lite IS250 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and
enhanced common mode surge suppression
Supports combined loads up to 250 watts continuous/2.1A at 120V
Isolation transformer with Faraday Shield offers 100% isolation from the input AC line
Neutral to ground bonding at the secondary eliminates common mode noise and provides an isolated ground reference for sensitive
equipment
Isolation transformer design serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades
Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility
grid-switching and lightning related surges
Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes
Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels
Includes 2 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch
Rugged all-metal housing ships ready for upright tower or wallmount installation
Specifications
OVERVIEW
Amp Capacity 2.1A at 120V AC
Efficiency 96%
Form Factor Small tower format, wall mountable
Input Plug Type NEMA 5-15P
Let-through Voltage
(Combination Wave)
L-N:
Let-through Voltage (Ring
Wave)
L-N:
Noise Suppression Rating 33-65dB normal mode; >80dB common mode
Nominal Voltage / Frequency 120V / 60Hz
Output Receptacle Qty / Type 2 NEMA 5-15R
Over Current Protection Yes, 2A circuit breaker
Suppression Joule Rating 680 Joules
Surge Test Conditions Per ANSI/IEEE C62.41 - (IEEE587) Cat. A & B test waveforms
Total Harmonic Distortion less than 1%
Transformer Type Low impedence isolation transformer
VA / Watt Capacity 250
INPUT
Input cord length (ft.) 6
Input cord length (m) 1.83
PHYSICAL
Shipping Dimensions
(HWD/in)
5.75 x 7.25 x 9
Shipping Dimensions
(HWD/cm)
14.61 x 18.42 x 22.86
Shipping weight (lbs) 13.7
Shipping weight (kg) 6.21
Page view 1
1 2 3

Comments to this Manuals

No comments