Tripp Lite B004-DUA2-HR-K Owner's Manual download pdf (Page 10)

Hotkey Command Action

[Scroll Lock] [Scroll Lock] [n]* [K] [S] [Enter]

SwitchesfocusoftheKVM and Audio to the

selectedportnumber.

[Scroll Lock] [Scroll Lock] [n]* [U] [S] [Enter]

SwitchesfocusoftheUSB and Audio to the

selectedportnumber.

[Scroll Lock] [Scroll Lock] [A] [Enter]

InitiatesAuto Scanmodeatthedefault

intervalof5secondsperport.Pressthe[Esc]

or[Spacebar]keytoexitAuto Scanmode.

[Scroll Lock] [Scroll Lock] [A] [n]* [Enter]

InitiatesAuto Scanmodeattheselectedtime

interval.Pressthe[Esc]or[Spacebar]keyto

exitAuto Scanmode.

* [n] stands for the port number of the computer that you are switching to, or the number of seconds (from 1 to

99) that an Auto Scan remains on each port.

Hotkey Setting Mode

AllcongurationoftheKVM’ssettingstakesplaceinHotkey Settingmode.AllcommandsinHotkey

SettingmodestartbyenteringtheHotkey Setting Mode Activation Command.WhenHotkey Setting

Mode isactivated,the[ScrollLock]and[CapsLock]keyboardLEDsashinsuccessionandordinary

keyboardandmousefunctionsaresuspended.Thefollowingsectiondescribeshowtoactivate

Hotkey Settingmode,andthecommandsthatcanbeperformedinit.Atableattheendofthis

sectionsummarizesallofthecommands.

Hotkey Setting Mode Activation Command

ToactivateHotkeySettingmode,dothefollowing:

1. Pressandholddownthe[NumLock]key

2. Whileholdingdownthe[NumLock]key,pressandreleasetheminus[-]key

3. Afterreleasingtheminus[-]key,releasethe[NumLock]key

Alternate Hotkey Setting Mode Activation Command

The Hotkey Setting Mode Activation Commanddefaultsat[NumLock][-],butcanbeswitchedto

use[Ctrl][F12].Whenswitchedto[Ctrl][F12],the[Ctrl]keytakestheplaceofthe[NumLock]key,

and[F12]takestheplaceofthe[-]key.ToactivatetheAlternate Hotkey Setting Mode Activation

Command,performthefollowingsteps(Torevertbacktothepreviouscommand,performthese

stepsagain):

1. ActivateHotkey Setting Modeusingtheaforementionedcommand

2. Pressandreleasethe[H]key

Alternate Port Switching Hotkey Command

Bydefault,thehotkeyproceedingsequenceusedinPort Switching Hotkeysis[ScrollLock][Scroll

Lock].Totogglebetween[ScrollLock][ScrollLock]and[Ctrl][Ctrl],dothefollowing:

1. ActivateHotkey Setting Modeusingtheaforementionedcommand

2. Pressandreleasethe[T]key

Keyboard Operating System

TheB004-DUA2-HR-KandB004-DUA4-HR-KdefaultkeyboardcongurationisforusewithPC

compatiblekeyboards.IfyouhaveaMacorSuncomputer,youcanenabletheKVMtoemulate

MacorSunkeyboardcommands.Whenenabled,yourPCcompatiblekeyboardcanbeusedto

performcommandsspecictoMacorSun(SeetheKeyboard Emulationsectioninthismanualfor

details).TosettheKeyboard Operating System,dothefollowing:

1. NavigatetotheportwhoseKeyboard Operating Systemsettingyouwishtochange

2. ActivateHotkey Setting Modeusingtheaforementionedcommand

3. Pressandreleasethe[F2](forMac),[F3](forSun),or[F10](forAuto-Detect)key

Basic Operation

14-03-189-93334F.indd 10 4/18/2014 4:43:59 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Tripp Lite B004-DUA2-HR-K Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for KVM switches Tripp Lite B004-DUA2-HR-K