Tripp Lite B020-008-17-IP User Manual download pdf (Page 94)

B020-008-17-IP User Manual

Keyboard Hotkey Operation

Keyboard hotkey combinations allow you to provide KVM focus to a port

directly from the keyboard. The B020-008-17-IP provides the following

hotkey features:

 Auto Scanning

 Skip Mode Switching

The hotkeys are: A and P for Auto Scanning; and the Arrow Keys for Skip

Mode.

Note: 1. In order for hotkey operations to take place, the OSD Toolbar must be

visible (see Port Operation, page 91).

2. To use the keys designated as hotkeys (i.e. A, P, etc.) for normal, non-

hotkey purposes, you must first close the toolbar.

3. For issues affecting multiple user operation in Auto Scan Mode, see

Multiuser Operation, page 93.

Auto Scanning

The Auto Scan function automatically switches among all the ports that are

accessible to the currently logged on User at regular intervals, so that the user

can monitor their activity automatically. (See Scan Select, page 50, for

information regarding accessible ports.)

Setting the Scan Interval

The amount of time Auto Scan dwells on each port is set with the Scan

Duration setting (see page 50).

Invoking Auto Scan

To start Auto Scanning, tap the A key. The Auto Scan function cycles through

the ports in order - starting from the first port on the installation. An S appears

in front of the Port ID Display to indicate that the port is being accessed under

Auto Scan Mode.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 159 160

No comments

Tripp Lite B020-008-17-IP User Manual Page 94