Tripp Lite OMNIVS800 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
These connections are optional. Your UPS will function properly without these connections.
Optional Installation
1
Phone Line or Phone/Network
Line Surge Suppression
Your UPS has jacks which protect against surges
on a phone line. Select models feature jacks which
also protect against surges on a network line.
Using appropriate telephone or network cords
connect your wall jack to the UPS jack marked
“IN.Connect your equipment to the UPS jack
marked “OUT.Make sure the equipment you
connect to the UPS’s jacks is also protected
against surges on the AC line. Not compatible with
PoE (Power over Ethernet) applications.
2
USB or DB9 Communication
Port (select models only):
These ports can connect your UPS to any
computer for automatic file saves and unattended
shutdown in the event of a power failure. Use with
Tripp Lite's PowerAlert Software and appropriate
USB or DB9 cable. A PowerAlert CD and USB or
DB9 cable may be included with your UPS; if so,
insert the CD into the CD tray of your computer
and follow the installation instructions. If
PowerAlert Software and the appropriate cable did
not come with your UPS, you can obtain the
software FREE via the Web at www.tripplite.com.
Any user-supplied DB9 pass-through or USB
cable may then be used to connect your UPS to
your computer. NOTE: This connection is
optional. The UPS will work properly without this
connection.
3
External Battery Connection
(select models)
All UPS models come with a robust internal battery
system; select models feature connectors that accept
an optional external battery pack (sold separately
from Tripp Lite*) to provide additional runtime.
Adding an external battery will increase recharge
time as well as runtime. See battery pack owner’s
manual for complete installation instructions. Make
sure cables are fully inserted into their connectors.
Small sparks may result during battery connection;
this is normal. Do not connect or disconnect battery
pack when the UPS is running on battery power.
* See Specifications section for battery pack available for
your specific UPS model.
NORM DELAY
1
NORM DELAY
2
NORM DELAY
3
OMNIVS1500XL shown
OMNIVS1500XL shown
OMNIVS1500XL shown
200912037 93-2248.indd 4 12/17/2009 11:05:59 AM
Page view 3
1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments