Tripp Lite SU750RTXLCD2U Owner's Manual download pdf (Page 18)

Operation

UPS Setup Overview

Your UPS supports a variety of advanced configuration options that can be set up via PowerAlert software, the front panel LCD screen

and the External Battery Configuration software. Many of the configurations can be adjusted using more than one of these methods.

1. Using PowerAlert Software

PowerAlert software (included on CD or available as a free Web download on www.tripplite.com) can be used to configure Economy

Mode ON and OFF. The software also supports Economy Mode Operation scheduling, allowing you to set timers to engage and disengage

Economy Mode.

2. Using the LCD Interface

This UPS supports a variety of user setup options and custom configurations that can be accessed via the front panel LCD screen.

Configuration and information items include:

1. Output Voltage

2. Output Frequency

3. Bypass Range

4. Overload Alarm

5. Shutdown After

6. Battery Save

7. Standby Mode

8. Frequency Converter

9. Economy Mode

10. Cold Start

11. Battery Test

12. External Batt

13. Audible Alarm

14. Factory Default

15.AlarmHistory

16. Information

To access these user options, enter the UPS SET-UP menu by pressing the SCROLL UP & SCROLL DOWN buttons simultaneously for

at least 3 seconds. The screen will report UPS SET-UP on the upper row and EXIT ENTER on the bottom row. Enter the setup menu by

pressing the button directly under the word “ENTER” in the LCD (the SCROLL UP button). In Set-Up mode, the second row will always

identify the function of the two scroll buttons (“

” & “

”). When a value is “set” via the LCD, the display will show a “*” immediately

following the new value.

Many LCD configuration items cannot be accessed in ON LINE, ON BATTERY, ECONOMY or FREQ CONVERTER mode. Turn

off connected equipment and set the UPS to STANDBY MODE prior to entering the UPS SET-UP menu to gain access to all

configuration items.

Any time the UPS SET-UP menu is entered, you will need to scroll through all 16 functions until you see the UPS SET-UP ENTER / EXIT

menu screen again and EXIT (

) is pressed. You can then power-on the UPS and all changed menu items will take effect. Below, we will

show the order of operations in the UPS Setup menu with a brief description of each configuration screen.

If you feel you may have enabled, disabled or specified advanced set-up values that may not be ideal for your configuration,

just reset to FACTORY DEFAULT to return all set-up items to the original factory configuration.

Note: Values in the LCD with an adjacent “*” symbol reflect the current SET value for that attribute.

13-11-176-93-3156.indb 18 11/27/2013 4:24:52 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 91 92

Comments to this Manuals

No comments

Tripp Lite SU750RTXLCD2U Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Tripp Lite SU750RTXLCD2U