Tripp Lite HCRK-INT Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
Features
Remote User Interface (RUI)
“Power” Button: This button turns the Power Supply Module’s outlets
(and any connected equipment) on and off.
To turn the Power Supply Module’s outlets ON: Press and hold the
“Power” button for one second. The alarm will beep once briefly after
one second has passed. Release the button. The “Power” LED will
illuminate. The “Power” button will turn the outlets on regardless of
whether the Power Supply Module is plugged in or not.
To turn the Power Supply Module’s outlets OFF: Press and hold the
“Power” button for one second. The alarm will beep once briefly after
one second has passed. Release the button. The “Power” LED will turn
off.
Alarm Mute Button: This button silences the Power Supply Module's
low battery alarm. To silence the low battery alarm, briefly press and
release the Alarm Mute button. The low battery alarm will beep once per
second unless it is silenced. Once the charge level falls below 30% (and
shutdown is imminent) the alarm will resume again after one minute.
Once the charge level falls below 30%, the user should save open files
and safely shut down connected equipment immediately. If the cart is
unattended and PowerAlert Software is loaded on a computer connected
to the Power Supply Module, PowerAlert will automatically save open
files prior to automatic shutdown.
“Power” LED: This green LED indicates whether the Power Supply
Module’s outlets are ON or OFF.
Battery Charge LED Meter: These LEDs will illuminate in several
sequences to indicate the approximate charge level of the Battery Module.
See “Operation” section for charts illustrating Battery Charge LED Meter
Display depending on different charge levels while discharging and
charging.
Communications Jacks: Connect the RUI to the Power Supply Module.
Power Supply Module
AC Outlets: Provide filtered, pure sine-wave 120V AC power for all
equipment—computers, monitors, diagnostic devices, scanners and more.
Coiled AC Input Cord with Hospital-Grade Plug: Connects Power
Supply Module to any 120V AC wall outlet.
CAUTION!
The Power Supply Module features a hospital-grade plug. If the plug is connected to a
wall outlet that is not hospital-grade, the unit may not be properly grounded.
200910240 93-2650-EN.indd 10 6/16/2010 5:06:33 PM
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments