Tripp Lite SU750RTXLCD2U Owner's Manual download pdf (Page 10)

  

  

Your model may differ.

 

  

  

  

Basic Connection and Start-Up

Plug your UPS’s line cord into an electrical outlet.

Your UPS must be connected to a dedicated circuit of sufficient

amperage. Note, however, that select models may be fitted with

different plug types. Refer to the rating table on top of your UPS

for more details on each selectable operating voltage.

Once your UPS is plugged in, all indicator LEDs will flash on

momentarily and the fan will turn on. The LCD display will scroll

two message screens for 2 seconds each:

Note: Until the UPS is connected to a powered AC outlet for the first time, COLD

START (startup in battery mode during a power failure) is not available. See

COLD START LCD setup section (pg. 22) for more information.

Power is not supplied to the UPS outlets in STANDBY mode in

the factory configuration. Bypass output can be enabled in

standby mode via the built-in LCD configuration screens.

Plug your equipment into your UPS.

Your UPS is designed to support computer equipment only. You

will overload your UPS if you connect household appliances or

laserprinterstotheUPS'soutlets.

Turn your UPS ON:

•Pressthe“ON/MUTE”button

•Holditforseveralsecondsuntilyouhearabeep

•Releaseit

After successful completion of startup diagnostics, your UPS will

begin providing power to its outlets. The INPUT, AC/DC

(converter), DC/AC (inverter) and OUTPUT LEDs will illuminate

and the LCD screen will display:

ON LINE MODE

LOAD= 00% 0.00KW

If you're having trouble turning the UPS on, you may be

pressing the ON button too long. Release the button

"during" the beep (not after it stops).

Note: UPS system will function properly upon initial startup; however, maximum

runtime for the unit’s battery will only be accessible after it has been charged for

24 hours.

Quick Start Guide

Note: External battery pack options require configuration using front panel LCD interface or via Tripp Lite’s EXTERNAL BATTERY CONFIGURATION software. See page 23

for more information if you are connecting external batteries to this UPS.

13-11-176-93-3156.indb 10 11/27/2013 4:24:43 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 91 92

Comments to this Manuals

No comments

Tripp Lite SU750RTXLCD2U Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Tripp Lite SU750RTXLCD2U