Tripp Lite SU750RTXLCD2U Owner's Manual download pdf (Page 14)

 

 

 

 

(FLASHING)

 

 

Operation

BYPASS MODE LEDs: INPUT, BYPASS (flashing) & OUTPUT

LEDs on.

BYPASS MODE LCD SCREEN: Operating mode and UPS load

information*

*Note: When bypass mode is set as a preference in the STANDBY MODE LCD screen, the BYPASS mode screen will alternate between BYPASS MODE with loading information

and PRESS ON KEY TO TURN UPS ON.

STANDBY MODE:

When first connected to a live power source, the UPS will automatically energize in Standby mode. The LCD panel will scroll “STANDBY

MODE / PRESS ON KEY TO START UPS” and the charger will activate as necessary, but there is no UPS output or battery backup support

availableinthismode.ToturntheUPSonfornormaloperation,pressandholdtheONbuttonuntilabeepisheard;theUPSwill

energize after a series of diagnostic tests are completed. To turn the UPS completely off from standby mode, just unplug the UPS from

itspowersource;theUPSwillreportOFFWAITINGandthefanandLCDscreenwillturnoffafterapproximately30seconds.

STANDBY MODE LEDs: INPUT LED on. STANDBY MODE LCD SCREEN (2 messages, 2 sec. each):

•STANDBYMODEandUPSloadinformation

•PRESSONKEYTOTURNONUPS(NotShown)

Note: A flashing INPUT LED indicates that input power is available, but is not stable enough to utilize. Pressing the ON button in standby mode while this LED is

blinking will “cold start” the UPS into battery mode.

STANDBY MODE LCD VIEWING OPTIONS:

When first entering STANDBY mode, the LCD screen will display load information in percentage and kilowatt units. To display additional

information screens, tap the SCROLL DOWN (“v”) button repeatedly. Additional screens include: Kilowatt hour usage, Kilowatt capacity

remaining, Runtime-remaining in minutes, Battery voltage and charge percentage, Output voltage and frequency, Input voltage and

frequency, Load Power Factor and Load percentage plus kVA capacity.

ECONOMY MODE:

Economy mode refers to an optional UPS configuration for reduced power consumption and heat output. A UPS in economy mode

reduces power consumption by suspending the double conversion [AC-to-DC / DC-to-AC] process whenever input power is already of high

enough quality to pass through to connected equipment unchanged. The UPS will automatically switch back to on-line mode if input

power quality deteriorates to ensure that connected equipment receives high quality power under all conditions. See LCD Set-Up section

under Operation for configuration info.

ECONOMY MODE LEDs: INPUT, AC/DC, ECO, OUTPUT LEDs on. ECONOMY MODE LCD SCREEN: Operating mode and UPS load

information

ECONOMY MODE LCD VIEWING OPTIONS:

When first entering ECONOMY mode, the LCD screen will display load information in percentage and kilowatt units. To display additional

information screens, tap the SCROLL DOWN (“v”) button repeatedly. Additional screens include: Kilowatt hour usage, Kilowatt capacity

remaining, Runtime-remaining in minutes, Battery voltage and charge percentage, Output voltage and frequency, Input voltage and

frequency, Load Power Factor and Load percentage plus kVA capacity.

13-11-176-93-3156.indb 14 11/27/2013 4:24:48 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 91 92

Comments to this Manuals

No comments

Tripp Lite SU750RTXLCD2U Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Tripp Lite SU750RTXLCD2U