Tripp-lite B064-032-04-IPG User Manual download pdf (Page 15)

Logging Into the B064-Series KVM Switch (continued)

AP Java Client Login

AP Windows Client Login (continued)

In those cases in which the Administrator does not want the B064-Series KVM Switch to be available via browser and the remote user is not

running Windows, the AP Java Client provides access to the KVM switch.

After downloading the AP Java Client, go to the location on your hard disk where you downloaded the program and double-click on it to bring up

the connection screen. The AP Java Client connection screen is the same as the Windows version, except that it does not contain a menu bar with

File and Help menus. Note: When accessing the AP Java Client for the ﬁrst time, you will be prompted to provide a serial number. This serial

number can be found on the CD that came with your KVM.

The Connection Screen

A description of the contents of the Connection Screen is given in the following table:

Item Description

Menu Bar The Menu Bar contains two menus; File and Help. The File Menu allows the operator to Create, Save, and Open Work ﬁles.

Server List

Each time the WinClient.exe ﬁle is run, it searches the User’s LAN segment for B064-Series KVM Switches, and lists the ones

it ﬁnds in this box. Double-click on any of the units in this list to connect to it.

Note: For a switch to show up in the Server List, the Enable Device List check box in the Operating Mode page (see Operating

Mode section under Device Management in OSD Operation for details) must be checked and the Program service port in the

Network page (see Network section under Device Management in OSD Operation for details) must be set to the same number

as in the AP Windows Client Port ﬁeld.

Server

This area is used when you want to connect to a B064-Series KVM Switch at a remote location.

• Click on the IP drop-down and select an address from the list. If the address you want is not listed, key in the target IP

address in the IP ﬁeld, and its port number in the Port ﬁeld.

• When the IP address and port number have been specied, click Connect to bring up a login dialog box. Provide a

Username and Password as provided by your system administrator and click OK to establish a connection with the B064-

Series KVM Switch.

• When you have nished with your session, click Disconnect to end the connection.

Message List Lists status messages regarding the connection to the B064-Series KVM Switch.

Switch to Remote

View

Once a remote connection with a B064-Series KVM Switch has been established, this button becomes active. Click it to switch

to the KVM Switch’s Main OSD Page.

The File Menu

The File Menu allows the operator to Create, Save, and Open Work Files. A Work File consists of all the information speciﬁed in a Client session.

This includes the items in the Server List and Server IP List.

Whenever a user runs the Client program, it opens with the values contained in the current Work File, i.e. the values that were in effect when the

program was last closed.

The File menu consists of three items:

Item Description

New Allows the user to create a named work ﬁle so that its values will not be lost and will be available for future use

Open Allows the user to open a previously saved work ﬁle and use the values contained in it

Save Allows the user to save the values presently in effect as the current work ﬁle

Exit Exits the AP Windows Client

1. If your KVM is displayed in the Server List, connect to it by highlighting it and

clicking on the Connect button. Note: For a switch to show up in the Server List,

the Enable Device List checkbox in the Operating Mode page (see Operating Mode

section under Device Management in OSD Operation for details for details) must be

checked and the Program server port must match what is set in the Network page (See

Network section under Device Management in OSD Operation for details.)

2. If your KVM does not display in the Server List, enter in its IP address in the IP

server ﬁeld and click the Connect button.

3. Upon clicking the connect button, you will be prompted to enter your username and

password. Enter in your username and password and press OK.

4. When connected, the Remote View button will be activated. Click on it to access the

KVM remotely. Click on the Disconnect button to log out of the KVM switch.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 80 81

Comments to this Manuals

No comments

Tripp-lite B064-032-04-IPG User Manual Page 15

Comments to this Manuals

Related products and manuals for Computer Accessories Tripp-lite B064-032-04-IPG