Tripp-lite B064-032-04-IPG User Manual download pdf (Page 80)

Fan Location & Speed Information

Temperature Sensor Location

Specifications (continued)

The B064-Series KVM switch contains 6 fans, whose location is shown in the image below.

The location of the KVM switches for temperature sensors is shown in the image below.

Fan Speed

Fan speed is automatically adjusted according to temperature. When the temperature reaches the levels mentioned below, the KVM switches

temperature sensors adjust the fan speed accordingly.

• Ifanyofthefoursensorssenseatemperaturegreaterthan32°C,allofthefanswillbesettospinathalfspeed

• Whenallfoursensorssensethetemperatureisbelow30°C,allofthefanswillbeturnedoff

• Ifanyofthefoursensorssenseatemperaturegreaterthan45°C,allofthefanswillbesettospinatfullspeed

• Whenallfoursensorssensethetemperatureisbelow40°C,allofthefanswillbesettospinathalfspeed

Note: The temperature inside the case can be higher than the ambient operating temperature of the KVM switch (0° to 50° C). However, if the

temperature reading shown in the Device Information section surpasses 85° C, you should either cool down the room or shut down the switch

until it cools.

1 2 ... 75 76 77 78 79 80 81

No comments

Tripp-lite B064-032-04-IPG User Manual Page 80