Tripp-lite B064-032-04-IPG User Manual download pdf (Page 54)

OSD Operation (continued)

Backup/Restore

The Backup/Restore subsection allows you to backup and restore the

KVM switch conﬁguration and user proﬁle information.

Backup

To create a backup of the KVM switch, follow the steps below.

1. Key in a password in the Password ﬁeld. Note: Setting a password

is optional. If you do not wish to use a password, you can skip this

step.

2. Click the Backup button.

3. A pop-up appears asking you to save the backup ﬁle. Browse to a

desired location on your computer to save the ﬁle to.

Restore

To restore the KVM switch using a backup ﬁle, follow the steps below.

1. Click on the Browse button to the right of the ﬁlename ﬁeld, and

then navigate to and select the backup ﬁle.

2. If you set up a password when creating the backup ﬁle, enter it in

the Password ﬁeld.

3. Select as many of the options that are presented as you wish

to restore, and then click the Restore button. Once complete, a

message appears to inform you that the procedure succeeded.

Ping Host

The Ping Host subsection lets you check the network status of devices

on the KVM installation.

To ping a device, follow the instructions below.

1. Key in the IP address or Host Name of the device into the IP

address/Host Name ﬁeld.

2. Click the Ping button. The ping results will be displayed in the

Results section.

Maintenance (continued)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 80 81

No comments

Tripp-lite B064-032-04-IPG User Manual Page 54