Tripp-lite B064-032-04-IPG User Manual download pdf (Page 52)

Upgrade Main Firmware

The Upgrade Main Firmware sub-section is used to upgrade the

ﬁrmware of the KVM switch. As ﬁrmware upgrades become

available, they can be found on www.tripplite.com/support. To

upgrade the KVM ﬁrmware, follow the steps below.

1. Go to www.tripplite.com/support to download the most current

ﬁrmware and save it to a computer that is not connected to the

KVM switch.

2. Logon to the OSD, and navigate to the Maintenance section, which

will open with the Upgrade Main Firmware sub-section page

displayed.

3. By default, the Check Main Firmware Version box is checked,

which causes the KVM to check to see if the current ﬁrmware is

newer than that of the ﬁrmware ﬁle you are using to upgrade the

KVM. If the current version is newer, you will not be allowed

to continue with the upgrade. If you wish to perform a ﬁrmware

upgrade without checking to see if the current ﬁrmware version is

newer than the upgrade ﬁle, simply uncheck this checkbox.

4. Click the Browse button, and then navigate to and select the

ﬁrmware upgrade ﬁle you downloaded from the Tripp Lite website.

When selected, the Upgrade Firmware button becomes active.

5. Click the Upgrade Firmware button to begin the ﬁrmware upgrade.

As the upgrade proceeds, progress is shown in the Upload Progress

bar.

6. When the upload is complete, a pop-up appears stating System will

reboot in a few seconds. The KVM switch will reboot (this may

take a few minutes), and the upgrade will be complete. In the event

of a ﬁrmware upgrade failure, see the Main Firmware Upgrade

Recovery section below.

Main Firmware Upgrade Recovery

Should the KVM ﬁrmware upgrade procedure fail, and the switch

becomes unusable, follow the steps below to restore the KVM.

1. Power off the KVM.

2. Press and hold the Reset switch on the front of the unit.

3. Power on the KVM while holding down the Reset switch.

4. The KVM will be restored to the originally installed ﬁrmware

version. You will now be able to access the KVM switch and try

upgrading the ﬁrmware again.

OSD Operation (continued)

The Maintenance section is used to upgrade the B064-Series KVM Switch’s ﬁrmware, as well as the ﬁrmware of the Server Interface Units

(SIUs) used to connect its ports to the installed devices.

Note: Super Administrators are the only users who are guaranteed access to the Maintenance section of the KVM. Administrators and Users can

only access this function if they are given permission.

The Main Screen

The Maintenance section can be used to upgrade the KVM and

SIU ﬁrmware, backup/restore system conﬁguration and account

information, ping network devices, and restore the KVMs default

values. When selected, the Maintenance section opens with the

Upgrade Main Firmware subsection displayed.

Maintenance

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 80 81

Comments to this Manuals

No comments

Tripp-lite B064-032-04-IPG User Manual Page 52

Comments to this Manuals

Related products and manuals for Computer Accessories Tripp-lite B064-032-04-IPG