Tripp Lite SU750RTXLCD2U Owner's Manual Page 21
- Page / 92
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
NO OUTPUT*
SCROLL SELECT
Continued on page 22.
DISABLE*
SCROLL SELECT
DISABLE*
SCROLL SELECT
21
Operation
7
The STANDBY MODE selection screen will appear.
STANDBY MODE screen allows users to enable the UPS to provide output power when
running in standby mode. The standby mode factory configuration is NO OUTPUT. In this
configuration, the screen will scroll STANDBY MODE / PRESS ON KEY TO TURN UPS ON.
Note: To enable bypass power output in standby mode, select BYPASS OUTPUT in the standby mode configuration
screen. In this configuration, the screen will scroll BYPASS MODE / PRESS ON KEY TO TURN UPS ON.
To Change This
Setting:
Press “SELECT” (
^
)
8
The FREQUENCY CONVERTER selection screen will appear.
FREQUENCYCONVERTERreferstotheabilityoftheUPStoconvert60Hzto50Hzor50Hzto
60Hz.TheUPSsystemautomaticallyselects50Hzor60Hzoperationbasedonutility
power conditions at start-up. The factory configuration of DISABLE is ideal for most
applications. Some users may wish to convert frequency for connected equipment. To
successfully configure your UPS for frequency conversion, ENABLE the FREQUENCY
CONVERTERfunctionandSETtheOUTPUTFREQUENCYfunctiontothedesired50or60Hz
setting.
9
The ECONOMY MODE selection screen will appear.
ECONOMY MODE is a UPS setting that enables enhanced efficiency and reduced BTU output
by suspending double-conversion circuits whenever input power is already of sufficient quality
to run connected equipment. In economy mode, the UPS consults the current BYPASS
RANGE setting (+/-5% to 10%). When input voltage strays pass the selected percentage
preset, the UPS will automatically switch to on-line mode. When input voltage falls back
within bypass range settings the UPS will automatically return to economy mode. Note: The
suggested setting range is +/- 5% to +/- 10%.
Press “SELECT” (^) to SET this value.
Press “SCROLL” (v) to advance to the next option.
Available values are: No output & Bypass output
Scroll through available values and press
SELECT (^) to SET.
Factory default = NO OUTPUT
To Advance to
the Next Screen:
Press SCROLL (
v
)
To Change This
Setting:
Press “SELECT” (
^
)
Press “SELECT” (
^
) to SET this value.
Press “SCROLL” (
v
) to advance to the next option.
Available values are: ENABLE, DISABLE
Scroll through available values and press
SELECT (
^
) to SET.
Factory default = DISABLE
To Advance to
the Next Screen:
Press SCROLL (
v
)
Note: The UPS must be
in Standby Mode to
change this setting.
Note: The UPS must be
in Standby Mode to
change this setting.
To Change This
Setting:
Press “SELECT” (
^
)
Press “SELECT” (
^
) to SET this value.
Press “SCROLL” (
v
) to advance to the next option.
Available values are: ENABLE, DISABLE
Scroll through available values and press
SELECT (
^
) to SET.
Factory default = DISABLE
To Advance to
the Next Screen:
Press SCROLL (
v
)
13-11-176-93-3156.indb 21 11/27/2013 4:24:58 PM
- Owner’s Manual 1
- SmartOnline 1
- Overview 2
- Important Safety Instructions 3
- Features 7
- Quick Start Guide 10
- Basic Connection and Start-Up 11
- 13
- 13
- 14
- 15
- 15
- Operation 16
- 17
- 17
- UPS Setup Overview 18
- SCROLL SELECT 22
- MONTHLY* 22
- 23
- 23
- 1: OVERLOAD 24
- FW VER:FW##### 24
- Troubleshooting 25
- Internal Battery Replacement 26
- Storage and Service 30
- Warranty Registration 30
- Manual del Propietario 31
- Descripción General 32
- GUARDE ESTAS INSTRUCCIONES 33
- Instalación 34
- Installation 36
- Características 37
- Guía de Inicio Rápido 40
- Conexión Básica y Arranque 41
- Conexión Básica y Arranque 42
- Operación 46
- 54
- 54
- 55
- 55
- Modelos de 2U 56
- Modelos de 3U 58
- Almacenamiento y Servicio 60
- Manuel du propriétaire 61
- Nomenclature des pièces 62
- CONSERVEZ CES CONSIGNES 63
- Caractéristiques 67
- Guide de démarrage rapide 70
- Connexions optionnelles 71
- Fonctionnement 76
- Aperçu du réglage de l’ASC 78
- DISABLE* 80
- 82
- 82
- 83
- Dépannage 86
- Modèles 2U 87
- Modèles 3U 89
- Entreposage et service 91
- 13-07-192 93-3156_revD 92
Related products and manuals for Uninterruptible power supplies (UPSs) Tripp Lite SU750RTXLCD2U
Uninterruptible power supplies (UPSs) Tripp Lite Omni VS Line Interactive UPS System Owner's Manual
(9 pages)
(9 pages)
Uninterruptible power supplies (UPSs) Tripp Lite Internet Office UPS System Owner's Manual
(2 pages)
(2 pages)
(20 pages)© 2020, manymanuals.com. All rights reserved. | 0.447 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals