Tripp-lite B064-032-04-IPG User Manual download pdf (Page 5)

4 5 6

2 3

Introduction (continued)

Supported Browsers

Components

Supported browsers for users that remotely log into the B064-Series

KVM Switches include:

Browser Version

Internet Explorer* 6 and higher

Firefox 1.5 and higher

Mozilla 1.7 and higher

Safari 2.0 and higher

Opera 9.0 and higher

Netscape 8.1 and higher

* Internet Explorer 64-bit is not supported, only 32-bit.

Front View

No. Component Description

Power LED Illuminates when the KVM switch is powered on

Port LEDs Port LEDs will illuminate in colors corresponding to the status of the port:

Green – Illuminate green when the corresponding port is connected and powered-on

Red – Illuminate red when the corresponding port is selected as having the KVM’s focus, but is either not

connected to a computer/server or is connected to a computer/server that is not powered-on

Orange – Illuminate orange when the corresponding port is connected, powered-on and selected as having the

KVM’s fo cus

Note: The Port LEDs are steady under normal conditions, but will ﬂash at half second intervals when the

corresponding port is being accessed under Auto Scan Mode or Skip Mode.

LAN LEDs The Primary (Link 1) and Secondary (Link 2) LAN LEDs will illuminate in colors corresponding to the

network transfer rate:

Red – Illuminate red at speeds of 10 Mbps

Orange – Illuminate orange at speeds of 100 Mbps

Green – Illuminate green at speeds of 1000 Mbps

USB Ports

Note: Only computers connected to the KVM by a B055-001-USB-V2 can access the KVMs Virtual Media

functionality. Additional USB ports support external keyboard and mouse, as well as virtual media functionality.

Reset Switch

Note: This recessed switch must be pushed with a thin object, such as the end of a paper clip or a ballpoint pen.

•PressingandreleasingtheResetButtonwhentheKVMswitchisrunningperformsasystemreset.

•PressingandholdingtheResetButtoninformorethanthreesecondswhentheKVMswitchisrunningresets

the switch conﬁguration to the factory default settings. Note: This does not clear User Account information.

•PressingandholdingtheResetButtoninwhilepoweringontheswitchwillrestoretheKVMswitchtoits

original ﬁrmware in the event of a ﬁrmware upgrade failure. Note: This operation should only be performed

in the event of a ﬁrmware upgrade failure that results in the device becoming inoperable.

Port Switching Buttons •PressthePort Down button to switch from the current port to the previous port on the installation.

•PressthePort Up button to switch from the current port to the next port on the installation.

Note: The ﬁgure shows the front panel of a B064-032-04-IPG. The B064-032-02-IPG, B064-016-02-IPG and B064-016-04-IPG contain all the

same front-panel features as the B064-032-04-IPG, except the B064-016-04-IPG and B064-016-02-IPG come with 16 ports instead of 32.

1 2 3 4 5 6 7 8 9 10 ... 80 81

Comments to this Manuals

No comments

Tripp-lite B064-032-04-IPG User Manual Page 5

Comments to this Manuals

Related products and manuals for Computer Accessories Tripp-lite B064-032-04-IPG